Panasonic MICRO-IMAGECHECKER A100 Series, Hardware Manual

Page: 22 / 102

Installation and Wiring A200/A100 Hardware
2 − 3
2.1 Connecting Peripherals
2.1 Connecting Peripherals
Be sure to connect peripherals to the controller only when the controller power is OFF.
24 V DC
Monitor − Cable
Camera − Cable
Ground
Keypad
*Only one camera can be connected to the A100.
Using Peripherals Correctly
− Do not connect products not specified by us to the controller.
− Be sure to connect peripherals only when the controller power is turned OFF.
Otherwise, damage could result.
− When you connect multiple cameras to an A200 controller be sure the cameras are
of the same type.
− When you connect only one camera to an A200 controller plug it in to the Camera
A jack.
− Avoid unintentional cable detachment by arranging the wiring so there is no weight
or load on the cable connector joints.
− When unplugging a connector, be sure to grasp the connector part itself and avoid
exerting unnecessary force on the cable. Also, avoid touching or allowing water to
come in contact with the connector pins.