background image

   PRECAUTIONS FOR SAFE OPERATION

 

 

It is imperative that the user complies with the operating instructions 
as it contains important safety advice.

 

 

Items and procedures are described so that you can use this unit correctly and safely.   
If the precautions advised are followed, this will prevent possible injury to the user and 
any other person. 

 

Precautions are illustrated in the following way: 

 

WARNING

 

Failure to observe WARNING signs could result in a hazard to personnel 

possibly resulting in serious injury or death.

 

 
 

CAUTION

 

Failure to observe CAUTION signs could result in injury to personnel and 

damage to the unit and associated property.

 

 

Symbol shows;

 

 

       

 

  T

his symbol means caution.

 

 

       

 

 

This symbol means an action is prohibited.

 

 

       

 

 

This symbol means an instruction must be followed.

 

 

Be sure to keep the operating instructions in a place accessible to users of this unit.

 

 

WARNING

 

As with any equipment that uses CO

2

 gas, there is a likelihood of oxygen depletion in the vicinity 

of the equipment.  It is important that you assess the work site to endure there is suitable and 
sufficient ventilation.  If restricted ventilation is suspected, then other methods of ensuring a safe 
environment must be considered.  These may include atmosphere monitoring and warning 
devices. 

 

For the State of California, USA Only: 
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special 
handling may apply.   

See www.dtsc.ca.gov/hazardouswaste/perchlorate. 

 

Summary of Contents for MDF-DU900V
































































Reviews: