Panasonic MCU-L424, Operating Instructions Manual

Page: 12 / 44

- 12 -
HOW TO OPERATE YOUR VACUUM CLEANER
CAUTION
Moving parts! To reduce the risk of
personal injury, DO NOT touch the
beater bar when vacuum cleaner is on.
Contacting the beater bar while it is
rotating can cut, bruise, or cause other
injuries. Always unplug from electrical
socket before servicing.
Use caution when operating near
children.
A) MAINS LEAD
Mains Lead
Quick Release
1 1
Turn the mains lead quick release to
either side and down to release the mains
lead.
Detach the plug from the mains lead and
pull the mains lead off the mains lead
quick release.
Plug
Mains Lead
1 2
Mains
Lead
Locking
Notch
1 3
Be sure the mains lead is locked under
the locking notch on the rear of the
handle.
Plug the mains lead into a 230-240 volt
mains socket located near the floor.
Note: To store mains lead, turn the
mains lead quick release to the upright
position, then wrap mains lead loosely
around mains lead quick release and
lower hook. Refer to MAINS LEAD
STORAGE, page 11.