Panasonic MC-YL799, Operating Instructions Manual

Page: 6 / 15

• When traveling over steps in the floor, always hold the
vacuum cleaner by the handle so that it does not fall over.
• When using the crevice tool, the vac gauge does not
display correctly, so remove the crevice tool before
checking the vac gauge.
NOTE
OPERATING YOUR VACUUM CLEANER
How to use the blower
For locations where the nozzle will
not enter, connect the hose to the
blower and blow the dust out.
Carrying handle
Use the nozzle that is appropriate for the location you are cleaning.
Flooring: Press lever A Carpet: Press lever B
• To decrease the suction power.
• If the vac gauge turns red when crevice tool is used, adjust the suction regulator.
To clean the dust in difficult to reach places
• Turn the hose connection wand until the projection is hidden by the groove,
as shown in the diagram.
Groove
Projection
Blower
• DO NOT use the extension wand when using the blower operation. Wand will get hot.
CAUTION
Press “I” to turn on the appliance, press “O” to turn off the appliance.