Panasonic MC-UL742, Operating Instructions Manual

Page: 14 / 20

Trouble Shooting
Please check the following first if you have any problems.
Problem Possible cause Solution
Motor fails (no noise
is heard at all).
- Unplugged at socket outlet.
- Mains lead fuse blown.
- Thermal cut-out device has
operated.
- Check if the plug is connected
firmly and ON/OFF switch is
ON.
- Check fuse and replace it if
blown (see page
6
).
- Unplug the appliance.
Allow to cool the appliance so
that the thermal cut-out device
will reset itself (see page
4
).
- Please empty dust bin and
clean filter in the dust bin
(see page
10 and 12
).
The motor runs but
lost suction.
- Full or clogged dust bin
- Worn beater bar
- Clogged nozzle
- Clogged hose or inlet
- Hose not inserted correctly.
- Dirty filters
- Empty the dust bin
(see page
10
).
- Replace a new beater bar
(see page
17
).
- Check for clogs (see page
13
).
- Check for clogs (see page
13
).
- Take to your nearest
Panasonic Service Centre.
- Check hose connection
(see page
8
).
- Please empty dust bin and
clean filter in the dust bin
(see page
10 and 12
).
- Replace a new HEPA filter
(see page
17
).
Beater bar does not
rotate.
- Selection beater bar switch
at “OFF” position.
- Overload protection reset
button on the nozzle tripped.
- Move selection beater bar
switch to “ON” position.
- Move selection ON/OFF
switch to “OFF” position.
- Unplug the appliance, remove
the dust from the nozzle
opening (see page
11
).
- Push the overload protection
reset button to reset
(see page
7
).
If the problem cannot be solved, please contact your local customer service centre.
The contacts can be found in “GUARANTEE” section (see page
18
).
14