EN8
Cleaning
Cleaning
Start
Start
AUTO
AUTO
：
Automatically adjust
the suction power
according to the amount
of dust detected
Dust sensor lamp
Visual display of rubbish that is not easily
visible to the naked eye
(keratin, dander, mite, etc.)
Idling OFF function
The fl oor nozzle will stop running
automatically when it leaves the fl oor
for more than 5 seconds, and resume
operation when it touches the fl oor again.
• In the idling OFF mode, the dust sensor
lamp (red) fl ashes slowly (at an interval
of approximately 3 seconds).
• The product will automatically turn off
after the idling OFF status is continued
for about 10 minutes.
• To change the setting of the idling OFF
function, refer to “Changing Settings”.
(P. EN16)
Battery level lamp
• Flashing when battery power is low
(In this state, the lamp will fl ash a few
times when the power is turned off to
remind you to charge in time)
• When there is no power at all, the
lamp will also fl ash a few times when
automatically turning off or restarting,
reminding you to charge in time
• Breathing light reminder when charging
• Flashes quickly when abnormal
• To change the sensitivity of the sensor
lamp, refer to “Changing Settings”.
(P. EN16)
When changing the suction mode
End
End
HIGH
HIGH
：
Runs with the strongest
suction power
Gently move the fl oor nozzle during use. Do not press down hard.
(So as not to damage the fl oor)
To prevent scratches, do not use it to clean burnished surfaces, such as piano.
Mutual conversion
per press
Request
Request
Off Lighting Flashing Flashing rapidly
Clean
A lot of dust
Summary of Contents for MC-SB30JW147
Page 2: ...Malaysian ML Malaysian ML ENGLISH EN ENGLISH EN ...
Page 39: ...EN19 ...
