background image

8

B) FILTER CARE

NOTE: For ease of access to the filter maintenance, remove the dust compartment (see page 7).

NOTE: Under normal use, it is advisable to change the clean air filter once or twice a year.
CAUTION: Never attempt to wash the HEPA filter. Under normal usage it will not require replacement.

IMPORTANT: To avoid damaging the cleaner never use it without the correct filters properly installed.

The central filter should be cleaned or
replaced when it becomes dirty.
To clean the filter, rinse it out in warm
water and 

dry it thoroughly before

replacing.

1) Central filter

2) Clean air filter / HEPA Filter (depending on model)

1

1

2

HEPA Filter 

2

3

NOTE: Under normal use the Main filter will not require replacement.
The filter should be cleaned or replaced if the air flow through the dust compartment is insufficient. Never attempt to wash
the main filter.

3) Main filter

1

2

3

4

Remove the filter and clean it
by tapping firmly against a
hard surface or replace with
a new one if necessary.

Rotate the filter until the filter
handle drops into the slots of
the filter support.

1

2

Filter
handle

Slots

Click

Click

Tab

Tab

Remove the filter as shown.
Insert the new one with the
rubber seal towards the main
body.

Summary of Contents for MC-E470













Reviews: