8
2. Remove the Body Cover Unit from the two projections of
the Upper Body Unit using a slotted screwdriver as shown
in the figure below.
Fig.7
3. Remove the Cord Rewind Button and the ON/OFF Switch
Button.
Caution: (Spring is placed inside.)
* Be careful not to lose the Spring.
Fig.8
4.4.
Removal of Upper Body Unit
and Power Control Switch
1. Remove the four screws of the Upper Body Unit.
2. Slowly pull up and remove the Upper Body Unit.
Fig.9
3. Remove both the screw fastening the Power Control
Switch and the screw fastening the P.C.B. Unit.
Remove the Power Control Switch and the P.C.B. Unit
together from the Motor Support Cover and then separate
them.
Fig.10
