background image

IMPORTANT SAFETY INSTRUCTIONS FOR THE 
USER

Before using the vacuum cleaner, please observe these basic safety instructions.

Correct usage

This appliance is for indoor use with 

 -

domestic purpose only and is not 

specifically designed for allergy sufferers. 

Use the appliance only in accordance with 

the instructions in this manual. Any other 

usage or modification is dangerous. The 

manufacturer is not liable for damage due 

to improper use of the appliance.

 WARNING

To reduce the risk of fire, electric shock, 

or injury

This appliance can be used by children 

 -

age from 8 years and above and  persons 

with reduced physical, sensory or mental 

capabilities or lack of experience and 

knowledge if they have been given 

supervision or instruction concerning 

use of the appliance in a safe way and 

understand the hazards involved.

Children shall not play with the appliance. 

 -

Cleaning and user maintenance shall not 

be made by children without supervision.

Do not use the appliance if the mains lead 

 -

or plug is damaged or faulty.

If the mains lead is damaged, it must be 

 -

replaced by the manufacturer, its service 

agent or similarly qualified persons in 

order to avoid a hazard.

Unplug from the socket outlet when not in 

 -

use and before cleaning the appliance or 

undertaking maintenance operations.

Turn off the appliance before removing 

 -

the plug. Do not pull on the mains lead, 

always pull on the plug body itself.

Hold the plug, when rewinding the mains 

 -

lead.

Do not handle plug or the appliance with 

 -

wet hands.

Do not use the appliance on people or 

 -

animals.

Do not use wet filters after wash, make 

 -

sure they are completely dry to avoid 

damaging the appliance.

Do not vacuum the followings

 -

Hot ash or embers

 -

Large and sharp objects

 -

Water or other liquids

 -

Explosive materials or gases

 -

Flammable or combustible materials or 

 -

gases

Toner dust, for example, those from 

 -

printers and photocopiers

Conductive dusts from power tool

 -

Keep the appliance away from heat 

 -

sources, for example, radiators, fires, 

direct sunlight, etc.

Do not use the appliance in areas where 

 -

flammable or combustible materials or gas 

may be present.

This appliance is fitted with a thermal 

 -

cut-out device which automatically turns 

off the appliance to prevent overheating of 

the motor. When this happens, disconnect 

the appliance from the socket outlet and 

check the dust compartment and filters 

as they may be full or clogged with fine 

dust. Check for any other obstructions 

in the hose or tube. After removing the 

obstruction, leave the appliance to cool 

down until the thermal cut-out resets after 

approximately 60 minutes.

Do not use or store the appliance or the 

 -

parts at head level to avoid the risk of 

injury.

Do not sit on the appliance.

 -

Be careful when using the appliance on 

 -

staircases as the appliance may falls.

Use the appliance where the lighting is 

 -

sufficient to avoid the risk of tripping.

CG710_EN_UK.indd   3

2012/01/11   10:24:14

 2

Summary of Contents for MC-CG710









Reviews: