6
3. Remove the wheel supporter right and wheel supporter
left.
4. Remove the upper body.
4.3.
Separate the cord reel U and
the body partition U
1. Remove the cord reel partition from the lower body.
2. Remove the two lead wire terminals.
*Pull the terminals out while holding down the termi-
nal lock release.
3. Slowly remove the plug from the body cover partition
stopper and release the pre-winding spring.
4. After inserting a screwdriver into the slit in the shaft and
turning 90 degrees to the left, pull the cord reel U away
from the body partition U.
*When assembling, carry out pre-winding for the
spring.
(The number of times to pre-wind is noted on the
metal plate.)
