8
4.4.
Motor removal
1. Remove the dust box lid assembly. (Refer to paragraph
4.1 on P.6)
2. Remove the upper body from the lower body. (Refer to
paragraph 4.2 on P.6)
3. Remove the P.C.B A Unit. (Refer to paragraph 4.3 on P.7)
4. Remove the two screws fixing the P.C.B holder and pull it
out from the lower body.
5. Lift the motor set section from the lower body U.
6. Remove all components fitted to the motor.
a. Remove the motor support rubber (front).
b. Remove the motor support rubber (rear).
c. Remove the motor support.
d. Remove the noise suppressor U.
e. Remove all lead wires.