6
4 Disassembly and Assembly Instructions
Important notice: Before replacing any components, make sure to turn OFF the vacuum cleaner.
Remove the power plug from the outlet.
* Caution:
1. Do not attempt to modify the machine, parts, etc. when marking repairs.
2. Even if a wire is partially disconnected, do not attempt to repair and/or connect it when a wired unit is available as
service parts. Replace the overall section with a new wired unit.
3. Pull out and/or insert the fastening terminal without twisting it.
4.1.
Dust box cover assembly
removal
1. Insert a flat-blade screwdriver between the dust box lid
and its fitting section on the body and move it in the direc-
tion of the arrow to remove the dust box lid from the body.
4.2.
Separate the upper and lower
body units
1. Set the body sideways and remove the two screws fixing
the upper body U from the bottom.
2. Remove the two screws fixing the upper body .
Summary of Contents for MC-CG383-RC79
Page 3: ...3 2 Location of Controls and Components ...
Page 4: ...4 ...
