13
English
≥
To remove from the TV:
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1
Remove the cover
E
.
2
Remove the assembly screws
B
from the pedestal.
3
Pull out the pedestal from the TV.
1
Remove the cable cover
H
.
2
Remove the assembly screws
G
from the pedestal.
3
Pull out the pedestal from the TV.
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
≥
Holes for wall-hanging bracket installation
≥
Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit’s performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure the
wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
≥
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
≥
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
≥
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
≥
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
Removing the pedestal
H
48-inch model
55-inch model
65-inch model
(View from the side)
Depth of screw
minimum: 10 mm
maximum: 31 mm
minimum: 12 mm
maximum: 39 mm
Diameter of screw
M6
48-inch model
55-inch model
65-inch model
Screw for fixing the TV onto the wall-
hanging bracket (not supplied with the
TV)
300 mm
300 mm
Rear of the TV
Warning
TH-48_55_65LZ1000GKT_Eng_TQB4GA0073.book 13 ページ ２０２２年５月２３日 月曜日 午後３時４分
