12.4. DISASSEMBLY / ASSEMBLY
PROCEDURE FOR THE LENS
NOTE: When Disassembling and Assembling for the Lens
1. To prevent the lens from catching the dust and dirt,
perform the following procedures with the CCD unit is
installing.
Disassembling procedures for the CCD unit, refer to
item 12.3.10.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them
by airbrush.
3. Do not touch the surface of lens.
4. Apply the grease (VKF1829) to the point where is shown
to “Grease apply” in the figure.
When the grease is applied, use a toothpick and apply
thinly.
12.4.1. Removal of the Master Flange Unit
31
DMC-FZ3PP / DMC-FZ3PL / DMC-FZ3EB / DMC-FZ3EG / DMC-FZ3EGM / DMC-FZ3GC / DMC-FZ3GD / DMC-FZ3GN / DMC-FZ3SG
Summary of Contents for LUMIXDMC-FZ3EB
