Advanced (Recording pictures)
- 110 -
• Refer to
for the [MOTION PICTURE] Mode menu.
• The flash setting is fixed to [
Œ
].
• Refer to
for information about the available recording time.
• The available recording time displayed on the screen may not decrease regularly.
• Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
• The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
• The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
• When operating the zoom when recording motion pictures, it may take time to come into focus.
• If the Extended Optical Zoom was used before pressing the motion picture button, those
settings will be cleared, so the focus range will change dramatically.
• When the aspect ratio setting is different in still and motion pictures, the angle of view changes
at the start of motion picture recording. When [
is set to [ON], angle of
view during motion picture recording is displayed.
• When recording motion pictures, the following functions cannot be used.
– [
], [
ƒ
] and [
Ù
] in [AF MODE]
– Direction Detection Function
– Extended Optical Zoom
– [FACE RECOG.]/[ISO LIMIT SET]
• It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures.
• If while recording motion pictures using the AC adaptor (optional) the power supply is cut off
due to a power cut or if the AC adaptor (optional) is disconnected etc., the motion picture being
recorded will not be recorded.
