8
5.4 Transportation.
Please protect the housing during transportation. It is recommended to remove the handle, and
shutter extension, and wrap the camera in foam or bubble wrap.
5.5 Accidents
The impact resistance of the housing is excellent. However after an accident the alignment of the
housing may have been altered. Therefore in the event of your housing suffering an impact force,
e.g. being dropped, it is essential that you do not use the housing for diving. Please return the
housing immediately for service and put a note inside to indicate the nature of the accident, so
that the severity can be assessed.
6. Service
To ensure the continued performance of your housing, it should be serviced every year, or after
every 200 dives whichever is earlier. Please note the terms for servicing the housing posted at our
website. A full service will include:
Inspect all components for wears or damage (report if repair necessary),
Clean all sealing surfaces,
Replace all O-ring seals,
Hydrostatic pressure test to 10 Bar.
Note: Replacement of damaged components may require additional cost.
7. Warranty
The warranty is valid within two years from the date of first purchase. The warranty applies
only to the housing itself.
10BAR does not accept any liability either implicit or
otherwise for any equipment housed inside,
or used together with the
housing.
In the event of the housing flooding
within the period of warranty, 10BAR will
repair or replace the housing. Please
note that disassembly of the housing will invalidate
warranty. Please fill in the
information below, and return a copy to 10Bar Underwater
Housing at the address below, to validate the warranty.