6
VQT2Z63
Attaching/Detaching the Lens
≥
Refer also to the camera’s operating instructions
for attaching and detaching the lens.
∫
Attaching the Lens
≥
Check that the camera is turned off.
1 Turn the lens rear
cap to detach it.
A
: Lens Rear Cap
2
Align the lens fitting
marks
B
(red marks)
on
the camera body and the
lens and then rotate the
lens in the direction of
the arrow until it clicks.
• Do not press the lens release
button
C
when you attach a lens.
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
• Check that the lens is attached correctly.
∫
Detaching the Lens
≥
Check that the camera is turned off.
Press the lens release
button
D
while turning
the lens as far as
possible in the direction
of the arrow to detach it.
• Attach the lens rear cap so
that the lens contact point does not get
scratched.
• Attach the body cap to the camera so no dirt or
dust will get inside the main unit.
∫
Attaching and Detaching the Lens Cap
≥
Be careful not to lose
the lens cap.
VQT2Z63_E.book 6 ページ ２０１０年７月２９日 木曜日 午後６時４７分
