English
11
VQT5F44
Button Functions
[
SL AUTO]
The flash can be fired remotely in sync with any
flash fired by other units.
[SL AUTO]: Flash level is set automatically.
[SL MANUAL]: The flash fires at the selected guide
number.
[
SL MANUAL]
[
MULTI]
The flash can be fired many times in succession
while the shutter is open. (“Multi Flash Mode” (P12))
Button
Function
Use
[
]
Adjust flash level by up to
w
5 EV.
This value is combined with
adjustments to flash
compensation made using the
camera.
1
Press [
] (
2
) or [ZOOM]
(
4
).
2
Rotate the dial to select the
value, and then press the
[OK] button.
[ZOOM]
Adjust the lighting angle manually.
[M] appears in the display.
[
]
Manually turn the LED light on or
off.
1
Before shooting, set the
LED light to [M].
“Other Settings” (P15)
2
Press [
] (
1
) to turn the
LED light on. Press [
] (
1
)
again to turn the LED light
off. To view the LED
brightness setting, press
and hold [
] (
1
) for
2 seconds while the LED
light is on.
≥
The flash and batteries may
become warm if you keep the
LED light on, but this is not a
malfunction.
[TEST/
CHARGE]
To fire a test flash, press the [TEST/CHARGE] button while the [TEST/
CHARGE] lamp is lit.
[BACK
LIGHT]
The control panel backlight lights for about 15 seconds.
≥
If the flash is fired when the backlight is lit, it turns off.
To turn the backlight on again, press the [BACK LIGHT] button.
Control panel display
Control operation
VQT5F44_JPN_PP_E.book 11 ページ ２０１４年４月１４日 月曜日 午後７時４１分
