Panasonic LUMIX DMC-ZS100, Owner'S Manual

Page: 201 / 406

201
SQW0547
Shutter and Drive Settings
Selecting a Drive Mode
Recording mode:
You can switch the operation to be performed when you press the shutter button.
1
Press [ ] button ( )
ZS100
ZS60
Drive Mode
2
Press to select the drive mode and
press [MENU/SET]
[Single]
When the shutter button is pressed,
only one picture is recorded.
[Burst] (→ 202)
The pictures are recorded in succession
while the shutter button is pressed.
[4K PHOTO]
(→ 184)
When the shutter button is pressed, a
4K photo is recorded.
[Auto
Bracket]
*
(→ 206)
When the shutter button is pressed,
the pictures are recorded with different
exposure settings based on the
Exposure Compensation range.
[Self Timer]
(→ 208)
When the shutter button is pressed,
recording takes place after the set time
has elapsed.
*
Cannot be set when using Intelligent Auto Mode.
•To cancel drive mode, select [ ] ([Single]) or [ ].
•When you press , you can change the settings of each drive mode. Note,
however, that you cannot change the settings of [Single].