Panasonic LUMIX DMC-ZS100 Owner'S Manual Download Page 208

Page: 208 / 406

208

SQW0547

Shutter and Drive Settings

Taking pictures with self-timer

Recording mode:

We recommend using a tripod. This is also effective for preventing jitter when pressing

the shutter button, by setting the self-timer to 2 seconds.

Press [

] button ( )

Press to select an item ([ ], etc.)

and press

Press to select the self-timer

operation setting and press [MENU/SET]

The shutter is activated after 10 seconds.
The shutter is activated after 10 seconds and three

pictures are taken at intervals of approximately

2 seconds.
The shutter is activated after 2 seconds.

•You can also set the time for the self-timer using

[Self Timer] in the [Rec] menu.

Summary of Contents for LUMIX DMC-ZS100























































































































































































































































































































































































































Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews:

Panasonic LUMIX DMC-ZS100, Owner'S Manual, Page: 208 / 406

Search results

Summary of Contents for LUMIX DMC-ZS100

Reviews: