2
3
Use the NFC function to connect
• If [ ] does not appear on the smartphone, the NFC function is
disabled. Refer to the instruction manual of your smartphone and
follow the steps indicated to enable the NFC function.
• This function can be used on Android (OS version 2.3.3 or later)
devices that support NFC. (Some devices may not be compatible.)
1 Start “Image App” on your smartphone
2 While [ ] is displayed on the connection screen
of “Image App”, hold the smartphone close to the
camera
Hold the smartphone close to this area
(within 5 mm (0.20 inch))
3 When a message confirming connection to the
smartphone is displayed on the camera, select
[Yes] and press [MENU/SET]
4 Hold the smartphone close to the camera again
•
Steps
3
and
4
are not necessary when
reconnecting.
Read a QR code to connect
1 Press and hold the [Wi-Fi] button on the camera
[Wi-Fi] connection lamp (lights blue)
Password
QR code
SSID
2 Start “Image App” on the smartphone
3 Select [QR code] on the “Image App” screen
4 Read the QR code displayed on the camera in
step
1
with “Image App” on the smartphone
Connecting to your smartphone
(continued)
Using the camera with a smartphone
If you are using an Android™ device
■
You can also connect by manually entering
the password.
After performing step
1
above:
Start “Image App” on the smartphone
Select [Wi-Fi] on the “Image App” screen
Select the SSID displayed on the camera in step
1
Enter the password displayed on the camera in
step
1
(First time connection only)
•
It is not necessary to enter the password when reconnecting.
If you check the item to display the password, you can confirm
the password as you enter it.
Saving pictures in the camera to your
smartphone
■
Playing back and saving pictures remotely
1 Start “Image App” on the smartphone
2 Select [
] on the “Image App” screen
The images captured by the camera are displayed on the smartphone.
3 Press and hold a picture and drag it to save it on
the smartphone
The picture is saved on the smartphone.
Switch the
location of the
pictures to be
displayed
• It is not possible to save pictures in RAW file format or AVCHD motion
pictures.
• 3D still pictures (MPO format) are saved as 2D still pictures (JPEG).
■
Use the NFC function to save pictures
If you are using an iOS device (iPhone, iPod touch, iPad),
the NFC function is not supported.
1 Play back pictures on the camera
2 Start “Image App” on your smartphone
3 While [ ] is displayed on the connection
screen of “Image App”, hold the smartphone
close to the camera
Hold the smartphone close to this area
(within 5 mm (0.20 inch))
• After connecting to the smartphone with the NFC function,
pictures are saved via a Wi-Fi connection.
• To select and save multiple pictures, see “Playing back and
saving pictures remotely” above.
Operating the camera remotely
■
Recording pictures remotely
1 Start “Image App” on the smartphone
2 Select [
] on the “Image App” screen
You can operate the zoom and press the shutter just like using a
remote control.
• When you use zoom, the camera may tilt as the lens barrel extends.
Make sure to secure the camera in place with a tripod or by other
means.
■
Playing back pictures remotely
1 Start “Image App” on the smartphone
2 Select [
] on the “Image App” screen
The images captured by the camera are displayed on the
smartphone.
Closing the connection
After use, close the connection between the camera and smartphone.
1 Press [Q.MENU/ ] button on the camera, select
[Yes] on the confirmation screen, and press
[MENU/SET]
2
iOS
From the “Image App” screen, press
the home button on the smartphone to
close the app
Android
From the “Image App” screen, press the
back button on the smartphone twice to
close the app
■
About the NFC function
• You can still connect to the smartphone even if the camera is turned
off. The camera lens may come out when the camera is turned on
after making connection. Be careful that vibration does not cause the
camera to drop.
Is your device equipped with an NFC function?
Yes
No
Guide to support site
Find the latest information at our support site.
http://panasonic.jp/support/global/cs/dsc/ (This site is available in
English only.)
