- 147 -
Wi-Fi
Search for available wireless access points.
• Confirm encryption key of the selected wireless access point if the network authentication is
encrypted.
• When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the wireless
access point you are using.
1
Press
3
/
4
to select the wireless access point you are
connecting to, and press [MENU/SET].
• Pressing [DISP.] will search for a wireless access point again.
• Wireless access points with non-alphanumeric characters may
not be displayed correctly.
• If no wireless access point is found, refer to “When connecting
.
2
(If network authentication is encrypted)
Enter the encryption key.
• For details on how to enter characters, refer to “Entering Text” section on
• A maximum of 64 characters can be entered.
∫
When connecting with [Manual Input]
1
On the screen displayed in step
1
of “If you are not sure about the WPS
compatibility (connecting by [From List])”, select [Manual Input] by pressing
3
/
4
,
then press [MENU/SET].
2
Enter the SSID of the wireless access point you are connecting to, then select [Set].
• For details on how to enter characters, refer to “Entering Text” section on
• A maximum of 32 characters can be entered.
3
Press
3
/
4
to select the network authentication type, and press [MENU/SET].
• For information on network authentication, see the manual of the wireless access point.
4
Press
3
/
4
to select the encryption type, and press [MENU/SET].
• The type of settings that can be changed may vary depending on the details of network
authentication settings.
5
(When an option other than [No Encryption] is selected)
Enter the encryption key and select [Set].
• Check the wireless access points instruction manual and settings when saving a wireless access
point.
• If no connection can be established, the wireless access point’s radio waves may be too weak.
Refer to
and
for details.
• Transmission speed may decrease, or may not be usable depending on the environment it is used
in.
If you are not sure about the WPS compatibility (connecting by [From List])
Network authentication type
Encryption types that can be set
[WPA2-PSK]/[WPA-PSK]
[TKIP]/[AES]
[Common Key]
[WEP]
[Open]
[No Encryption]/[WEP]
Cancel
Select
Set
Manual Input
0123456ABCD-1
0123456ABCD
Select the destination (AP)
Update
DISP.
