manualshive.com logo in svg

Panasonic Lumix DMC-TZ3EB, Service Manual

Share
Download
Panasonic Lumix DMC-TZ3EB Service Manual Download Page 29

29

8.4.2.

Removal of the Direct Frame, Both
Side Cam, 1st Lens Frame/2nd
Lens Frame/3rd Lens Frame, Pene-
tration Cam and Drive Frame

• Push the penetration cam to the indicated by arrow from

lens side, and then remove the unit of direct frame, both side
cam, 1st lens frame/2nd lens frame/3rd lens frame, penetra-
tion cam and drive frame from the fixed frame unit.

8.4.3.

Removal of the Direct Frame, Both
Side Cam and 1st Lens Frame/2nd
Lens Frame/3rd Lens Frame

1. Turn the drive frame, and then Align the groove of drive

frame and pin of 1st lens frame.

2. Push the 1st lens frame to the indicated by arrow from

lens side, and then remove the unit of direct frame, both
side cam and 1st lens frame/2nd lens frame/3rd lens
frame from the penetration cam and drive frame.

8.4.4.

Removal of the Direct Frame, Both
Side Cam and 2nd Lens Frame/3rd
Lens Frame

• Turn to the indicated by arrow(1) while picking the pin, and

then remove the unit of direct frame, both side cam and 2nd
lens frame/3rd lens frame from the 1st lens frame.

Summary of Contents for Lumix DMC-TZ3EB





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands