Panasonic Lumix DMC-TZ37 Operating Instructions Manual Download

Page: 309 / 314

Others

Usage cautions and notes

VQT4T12

- 309 -

This product contains OpenSSL software developed by the OpenSSL Project, and can be used under

the following licencing conditions.

Redistribution and use in source and binary forms, with or without modification, are permitted provided

that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and

the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions

and the following disclaimer in the documentation and/or other materials provided with the

distribution.

3. All advertising materials mentioning features or use of this software must display the following

acknowledgment:

“This product includes software developed by the OpenSSL Project for use in the OpenSSL

Toolkit. (http://www.OpenSSL.org/) ”

4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote

products derived from this software without prior written permission. For written permission,

please contact [email protected].

5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in

their names without prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment:

“This product includes software developed by the OpenSSL Project for use in the OpenSSL

Toolkit (http://www.OpenSSL.org/) ”

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS’’ AND ANY EXPRESSED OR

IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO

EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([email protected]).

This product includes software written by Tim Hudson ([email protected]).

Summary of Contents for Lumix DMC-TZ37



























































































































































































































































































































Search results

Summary of Contents for Lumix DMC-TZ37

Reviews:

Related manuals for Lumix DMC-TZ37

Brands by name

Popular brands

Panasonic Lumix DMC-TZ37, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-TZ37

Reviews:

Related manuals for Lumix DMC-TZ37

Brands by name

Popular brands