24
7.3.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
7.3.1.
Extension Cable Connections
CAUTION-1. (When servicing FLASH P.C.B.)
1. Be sure to discharge the capacitor on FLASH P.C.B.
Refer to "HOW TO DISCHARGE THE CAPACITOR ON FLASH P.C.B.".
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH P.C.B.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH P.C.B.
No.
Parts No.
Connection
Form
1
RFKZ0494
FP9003 (MAIN) - CCD UNIT
45PIN 0.3 FFC
2
RFKZ0581
FP9005 (MAIN) - LENS UNIT
47PIN 0.3 FFC
3
VFK1541
FP9004 (MAIN) - PS9901 (TOP OPERATION P.C.B.)
40PIN B to B
4
VFK1906
PP8001 (FLASH P.C.B.) - PS9903 (TOP OPERATION P.C.B.)
20PIN B to B
Summary of Contents for Lumix DMC-TZ18EB
