- 127 -
Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to be
printed out and instruct that printing be started on the camera’s LCD monitor.
• Some printers can print directly from the card removed from the camera. For details, refer to the
operating instructions of your printer.
Preparations:
Turn on the camera and the printer.
Remove the card before printing the pictures from the built-in memory.
Check print quality and other settings on the printer before printing the pictures.
Connect the printer and camera with the USB connection cable
(supplied).
Press
3
/
4
to select [PictBridge(PTP)], and then press [MENU/SET].
• Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the printer are connected, the status indicator blinks and
the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the
USB connection cable.
• Do not disconnect the USB connection cable while [
å
] (Cable disconnect prohibit icon) is displayed.
(may not be displayed depending on the type of printer used)
• Before connecting or disconnecting the AC adaptor (optional), turn the camera off.
• Before inserting or removing a card/battery, turn the camera off, and disconnect the USB connection
cable.
• Motion pictures cannot be printed out.
• Check the directions of the connectors, and plug them straight in or unplug them straight
out. (Otherwise the connectors may be bent out of shape which will cause a malfunction.)
• Do not use any other USB connection cables except the supplied one or a genuine
Panasonic USB connection cable (DMW-USBC1: optional).
A
USB connection cable (supplied)
B
Align the marks, and insert.
ャ
モヷ
ヰ
