Recording
- 85 -
About the GPS information display screen
•
An icon displaying the positioning status is displayed in the
recording screen when the GPS is started up.
Location name information
•
Location name information is displayed on the screen once the positioning is successful.
Displayed location name information is stored in this unit.
•
Current location information stored in the unit is deleted in the following cases:
–
When [GPS Setting] is set to [OFF]
–
When the power is turned off with [GPS Setting] set to [
]
–
When the setup is reset by [Reset]
About the GPS information stored in the recorded pictures
Once the positioning is successful, the following informations are stored in the recorded
pictures and motion pictures recorded in [Motion JPEG] or [AVCHD] set to [GFS], [GS].
–
latitude/Longitude
–
Location name information (country/region, prefecture/state, city/ward/county, town/village,
landmark)
Valid information for the current position is displayed as location name information by
searching the location names and landmarks in the database in this unit based on the
longitude/latitude from the positioning. (It may not display the closest location.)
•
[---] is displayed when there is no valid information even when the positioning is successful.
•
Even when the location name information is displayed as [---], it may be possible to select the
location name information with [GPS Area Select]
(P87)
.
•
Desired landmark may not be registered. Location name information is as of
December 2010
.
For details of the types of landmark, refer to
“
Landmark types
”
on
P170
.
•
Location name information (location names or landmark names) may be different from the
official names.
Icon displaying the
positioning status
Elapsed time after successful positioning
[
]
Within the last 5 minutes
[
]
Between 5 minutes and 1 hour ago
[
]
Between 1 hour and 2 hours ago
[
]
More than 2 hours ago
[
]
When positioning was not possible
Summary of Contents for Lumix DMC-TS3
Page 231: ......
