Basic
- 50 -
• [Auto Power Off] is set to [5MIN.] in the Intelligent Auto Mode.
• [Auto Power Off] does not work in the following cases.
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a Slide Show
– [Auto Demo]
• [Auto Review] is activated regardless of its setting in the following cases.
– When using Auto Bracket
– When using [Burst]
• In Intelligent Auto Mode or [Panorama Shot] in Scene Mode, the Auto Review function is fixed
to [2SEC.].
• [Auto Review] does not work when recording motion pictures.
• The folder number is updated and the file number starts from 0001.
• A folder number between 100 and 999 can be assigned.
When the folder number reaches 999, the number cannot be reset. We recommend formatting
after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the built-in memory or the card first and then use this
function to reset the file number.
A reset screen for the folder number will then appear. Select [Yes] to reset the folder number.
p
[Auto Power Off]
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[2MIN.]/[5MIN.]/[10MIN.]/[OFF]
o
[Auto Review]
Set the length of time that the picture is displayed after taking the
still picture.
[1SEC.]
[2SEC.]
[HOLD]:
The pictures are displayed until one of the buttons is pressed.
[OFF]
v
[No.Reset]
Reset the file number of the next recording to 0001.
