Panasonic Lumix DMC-TS1 Operating Instructions Manual Download Page 139

Page: 139 / 193

- 139 -

Advanced (Playback)

This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically.

Select [ROTATE DISP.] on the [PLAYBACK] mode menu.

(P27)

Note

•

When you play back pictures on a PC, they cannot be displayed in the rotated direction unless

the OS or software is compatible with Exif. Exif is a file format for still pictures which allows

recording information etc. to be added. It was established by “JEITA (Japan Electronics and

Information Technology Industries Association)”.

•

It may not be possible to rotate pictures that have been recorded with other equipment.

•

The display is not rotated during multi playback

(P50)

or [CALENDAR]

(P131)

•

Pictures recorded with the camera upside down will not be displayed rotated.

[ROTATE DISP.]

Press

to select [ON] and then press [MENU/SET].

•

The pictures are displayed without being rotated when you select

[OFF].

•

Refer to

P49

for information about how to play back pictures.

Press [MENU/SET] to close the menu.

Summary of Contents for Lumix DMC-TS1


































































































































































































Search results

Summary of Contents for Lumix DMC-TS1

Reviews:

Panasonic Lumix DMC-TS1, Operating Instructions Manual, Page: 139 / 193

Search results

Summary of Contents for Lumix DMC-TS1

Reviews: