27
[WHEN ASSEMBLING]
CAUTION: Before soldering the Terminal A (Connecting
part of Main P.C.B. and Top P.C.B.)
Before soldering the Terminal A, make sure to tighten the
"Screw (D)" first in order to eliminate the gap between Main
P.C.B. and Battery Frame. Otherwise, soldered terminal A part
may be damaged after assembling.
NOTE:
Since the screw (D) is for fixing the frame plate A, the screw
(D) has to be removed once, after soldering.
8.3.9.
Removal of the Top P.C.B.
(Fig. D11)
8.3.10.
Removal of the Battery Door Unit
(Fig. D12)
NOTE: (When Installing)
Make sure to confirm the following points when installing:
• The Screw is tightened enough.
• Installing conditions are fine. (No distortion, no abnormal-
space.)
• No dust and/or dirt on Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)