Panasonic LUMIX DMC-LS2PP, Service Manual

Page: 25 / 52

25
8.4. Disassembly Procedure for the
Lens
NOTE: When Disassembling and Assembling for the Lens
1. To minimize the possibility of the CCD being dirt, perform
disassemble and/or assemble under the condition of the
CCD is being mounted.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
8.4.1. Removal of the Zoom Motor Unit
and Master Frange Unit
1. Remove the lock (3 points).
2. Unscrew the 5 screws (A).
3. Remove the Zoom Motor Unit to the indicated by arrow.
4. Remove the Cover to the indicated by arrow.
5. Remove the Master Frange unit.
8.4.2. Removal of the Drive/Direct Unit,
1st Lens Frame/2nd Lens Frame
Move Unit
1. Turn the drive gear to the indicated by arrow fully.
2. Push the drive unit to the indicated by arrow from lens
side, and then remove the unit of drive/direct unit, 1st lens
frame/2nd lens frame move unit from the fixed frame
unit.