31
Recording Motion Images
With this camera you can also record motion
images. (If using the supplied 16MB SD
Memory Card, it is possible to record for
about 75 seconds)
[Preparations]
• Insert the card. (P16)
• Set the power switch to [ON]. (P18)
• Set the operational mode dial to single mode
[
]. (P25)
1
Set the REC mode dial to motion image
mode [
].
2
Center the subject in the focus area
on the LCD monitor and press the
shutter button halfway.
• When the focus is adjusted, the focus
indication [
¥
] appears. (
1
Focus indication)
3
By pressing the shutter button fully,
the recording starts.
• The audio REC starts simultaneously.
4
By pressing the shutter button fully
again, recording stops.
• If during the recording the memory of the
card becomes full, the recording is stopped
automatically.
ª
In motion image record mode, the settings
listed below are not available
• Picture size (P38)
• Built-in flash (P34)
• White balance (P52)
• ISO sensitivity (P54)
• The remaining time displayed on the LCD monitor is an approximation.
• You cannot record motion images without audio.
• If using the MultiMediaCard, after recording motion images, the screen may appear grey,
but this is not a malfunction.
• After recording starts, the auto focus and zoom are locked (with the first frame).
• Recording could suddenly stop when recording motion images.
135S
KC3‑PP.book 31 ページ ２００２年４月５日 金曜日 午前１１時５５分
