Panasonic Lumix DMC-GX80KEBK Owner'S Manual For Advanced Features Download Page 173

Page: 173 / 337

173

7. Recording Motion Pictures

Press the motion picture button (or shutter
button) to start recording.

Elapsed recording time

Set operating time

• Immediately release the motion picture button (or the

shutter button) after pressing it.

• When the set operating time has elapsed, recording

automatically ends.
To end recording midway, press the motion picture
button (or the shutter button) again.

∫

Changing the position and size of a crop frame

Press [Fn3] while the recording screen is displayed, and perform steps

and

∫

To cancel [4K Live Cropping] recording

Set [OFF] in step

• Brightness is measured and focus is done in the cropping start frame. During motion picture

recording, they are done in the crop frame. To lock the focus position, set [Continuous AF] to
[OFF], or set the Focus Mode to [MF].

• [Metering Mode]

will be [

] (Multiple).

20s

Summary of Contents for Lumix DMC-GX80KEBK


















































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-GX80KEBK

Reviews:

Panasonic Lumix DMC-GX80KEBK, Owner'S Manual For Advanced Features, Page: 173 / 337

Search results

Summary of Contents for Lumix DMC-GX80KEBK

Reviews: