Panasonic Lumix DMC-GH1KEB Service Manual Download Page 53 | Manualshive

Page: 53 / 86

Panasonic Lumix DMC-GH1KEB Service Manual Download Page 53

53

9.4.

Disassembly and Assemble Procedure for the Lens

Refer to the following table and the illustration for disassembly and assembly.

NOTE:

1. To keep maintaining the dustproof environment, it is recommended dealing with Clean box.

(Refer to “ 8.2. Clean Box “ which is found in section "8.Service Fixture & Tools" of this manual.)

2. Do not allow dirt and dust to get into the inside part/component of the unit.
3. Do not touch the surface of the lens glasses with your fingers.
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).

Interchangeable Lens (H-FS014140)

NOTE:

1. .When installing the screws, be sure to use the torque driver (RFKZ0456) and tighten the screws with specified torque, men-

tioned on the above table.

2. The Ref.B209 is no need to remove/install for disassembly and assembly.

Use VFK1390 (small driver) when the installation is necessary because the screw was lost.

«
...
51
52
53
54
55
...
»

Summary of Contents for Lumix DMC-GH1KEB























































































Reviews:

No comments