Panasonic Lumix DMC-GF8 Operating Instructions Manual Download

Page: 165 / 360

165

6. Shutter and Drive Settings

• The burst speed may become slower depending on the following settings.

– [Picture Size]

/[Quality]

/[Sensitivity]

/Focus Mode

/[Focus/

Release Priority]

(P147)

• Burst speed can also be set with [Burst Rate] in the [Rec] menu.
• Refer to

P128

for information about RAW files.

Focus on the subject and take a picture.

• Hold down the shutter button fully to activate the Burst

Mode.

∫

Cancelling the Burst Mode

Select [

] ([Single]) or [

] from among the drive modes.

(P163)

Focusing in Burst Mode

The focus changes depending on the setting for [Focus/Release Priority]

(P147)

in the

[Custom] menu and the setting for [Focus Mode]

(P135)

in the [Rec] menu.

1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first

picture.

2 The burst speed may become slower because the camera is continuously focusing on the

subject.

3 Burst speed takes priority, and focus is estimated within possible range.

Focus mode

[Focus/Release

Priority]

Focus

[AFS]

[FOCUS]

At the first picture

[RELEASE]

[AFF]/[AFC]

[FOCUS]

Normal focusing

[RELEASE]

Predicted focusing

[MF]

—

Focus set with Manual Focus

AFS

50 i

4:3

Summary of Contents for Lumix DMC-GF8









































































































































































































































































































































































Search results

Summary of Contents for Lumix DMC-GF8

Reviews:

Related manuals for Lumix DMC-GF8

Brands by name

Popular brands

Panasonic Lumix DMC-GF8, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-GF8

Reviews:

Related manuals for Lumix DMC-GF8

Brands by name

Popular brands