manualshive.com logo in svg

Panasonic Lumix DMC-GF2KPP, Service Manual, Page: 49 / 82

Share
Download
Panasonic Lumix DMC-GF2KPP Service Manual Download Page 49

49

*3 NOTE: (After exchange the mount box unit)

• Execute the resolution inspection by the comparison with the standard model (DMC-G1K etc.: operates normal). 
• Refer to the adjustment instruction in the adjustment software for details.

*4

• Confirm self recording/playback motion picture of AVCHD mode by the LCD.
• Confirm it on the TV with HDMI socket when repair HDMI relation.

* There are no LCD/LVF adjustment model.

*5 NOTE: (When AWB adjustment)

• After change to WB adjustment mode for service with software, the adjustment is executed.

After adjusting the AWB adjustment, to cancel the WB adjustment mode for service.

• Details, refer to the instructions in the adjustment software.

About the 3D interchangeable lens (H-FT012) correspondence

This unit has no special structure (circuit or part) for the 3D interchangeable lens correspondence, only by software is processed
the 3D interchangeable lens correspondence.
Therefore, if taken with other lenses as usual, the 3D interchangeable lens is no problem for operation.

Summary of Contents for Lumix DMC-GF2KPP



















































































Reviews:

No comments