VQT2G44
82
Advanced (Recording pictures)
Press
2
/
1
to select an item.
•
You can also use the rear dial to select.
•
When you press [DISPLAY] on the screen shown right,
explanations about each Film Mode are displayed. (When you
press [DISPLAY] again, the screen returns to the previous
screen.)
Press [MENU/SET] to set.
•
You can also press the shutter button halfway to set.
Note
•
You can also set from the Quick Menu. (P30)
•
Use the Quick Menu (P30) to set when in Intelligent Auto Mode.
•
In Film Mode, the camera may do something equivalent to pull processing or push processing
to create a picture with particular characteristics. The shutter speed may become very slow at
this time.
Press
2
/
1
to select a film.
Press
3
/
4
to select an item and
2
/
1
to adjust.
•
You can also use the rear dial to adjust.
Item
Effect
[STANDARD] (COLOR)
This is the standard setting.
[DYNAMIC] (COLOR)
The saturation and contrast of the stored colors are increased.
[NATURE] (COLOR)
Brighter red, green and blue. Enhanced beauty of nature.
[SMOOTH] (COLOR)
The contrast is lowered for smoother and clearer color.
[NOSTALGIC] (COLOR)
Lower saturation and contrast. Reflecting passage of time.
[VIBRANT] (COLOR)
Higher saturation and contrast than dynamic.
[STANDARD] (
)
This is the standard setting.
[DYNAMIC] (
)
The contrast is increased.
[SMOOTH] (
)
Smooths the picture without losing the skin texture.
[MY FILM 1]/[MY FILM 2]
The saved setting is used.
[MULTI FILM]
It will take pictures changing the type of film in accordance with
the setting every time the shutter button is pressed. (Up to 3
pictures)
Adjusting each Film Mode to the desired setting
DMC-GF1KPP-VQT2G44_eng.book 82 ページ
年
月
日 月曜日 午後
時
分