2. Getting Started/Basic Operations
54
∫
About the tilt sensor display
With the tilt sensor displayed, it is easy to correct the tilt of the camera etc.
1
Press [DISP.] to display the tilt sensor.
2
Check the tilt of the camera.
A
Horizontal direction:
Correcting tilt to the left
B
Vertical direction:
Correcting downward tilt
• When the tilt of the camera is little, the indicator changes to green.
• When recording with a vertical orientation, the display automatically switches to a
vertically orientated display.
• Even after correcting the tilt, there may still be an error of approximately
n
1°.
• When a function button is set to [Level Gauge], the tilt sensor display can be switched on/off by
pressing the function button.
Not available in these cases:
• Tilt sensor display may not be displayed correctly when this unit is in motion.
• When tilted significantly upwards or downwards to record, the tilt sensor display may not be
displayed correctly, and the Direction Detection Function
may not work correctly.
