manualshive.com logo in svg

Panasonic LUMIX DMC-G7KPP, Service Manual, Page: 14 / 67

Share
Download
Panasonic LUMIX DMC-G7KPP Service Manual Download Page 14

14

3.4.2.

Important Notice of Servicing

This camera unit has the personal information of wireless LAN connection the customer has registered.
For the protection of private information, please erase the personal information after the completion of repair by “Initial Settings”.
In addition, please print out the following documents, and pass to the customer with the camera unit.

Printing Material [Leaflet for Customer]

[For The Customer]

Before using your camera please check the Wi-Fi settings.
Depending on what was serviced, the settings may have been reset to the factory defaults.

1. If the settings were reset you will need to reenter your Lumix Club login ID and password.

If you have forgotten the login ID and/or Password, please connect to the Lumix Club web
site and create a new ones.

2.You may also have to reenter the settings for your local Wi-Fi network settings.

We recommend consulting the operating manual if you have any questions.

Summary of Contents for LUMIX DMC-G7KPP




































































Reviews:

No comments