150
Recording
• To compensate the exposure using the function lever, set [Function Lever]
in the
[Custom] menu to [EXP.].
• When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of the
built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
• When the exposure value is out of the
j
3 EV to
i
3 EV range, the brightness of the recording
screen will no longer change. It is recommended to record by checking the actual brightness of
the recorded image in the Auto Review or playback screen.
• The set exposure value is memorised even if the camera is turned off.
• When the aperture and shutter speed values are displayed in the screen in the Programme AE
Mode, Programme Shift operation and Exposure Compensation operation is switched every
time the rear dial is pressed.
• In the Aperture-Priority AE Mode, Aperture Setting operation
and Exposure
Compensation operation is switched every time the rear dial is pressed.
• In the Shutter-Priority AE Mode, Shutter Speed Setting operation
and Exposure
Compensation operation is switched every time the rear dial is pressed.
Not available in these cases:
• The compensation range of the exposure will be limited depending on the brightness of the
subject.
DMC-G6PDF-VQT4Z82_mst.book 150 ページ ２０１３年４月１８日 木曜日 午前１１時５３分
