145
Recording
Applicable modes:
Adjust the flash brightness when pictures taken with the flash are over or underexposed.
1
Select [Flash] in the [Rec] menu.
2
Touch [Flash Adjust.].
3
Set the flash output by dragging the slide bar, and then touch [Set].
• You can adjust from [
j
3 EV] to [
i
3 EV] in steps of [1/3 EV].
• Select [
n
0] to return to the original flash output.
• [
i
] or [
j
] is displayed on the flash icon in the screen when the flash level is adjusted.
• Only available when [Wireless] in [Flash] is set to [OFF].
• The [Flash Adjust.] setting also applies to an external flash. (excluding the wireless flash)
Applicable modes:
When [Auto Exposure Comp.] in [Flash] in the [Rec] menu is set to [ON], the brightness of
the built-in flash will automatically be set to the level appropriate to the selected Exposure
Compensation.
• For details on Exposure Compensation, refer to
• The [Auto Exposure Comp.] setting also applies to an external flash.
Adjust the flash output
Synchronising the output of the built-in flash to the Exposure
Compensation
DMC-G6PDF-VQT4Z82_mst.book 145 ページ ２０１３年４月１８日 木曜日 午前１１時５３分