manualshive.com logo in svg

Panasonic LUMIX DMC-FZ5GC, Operating Instructions Manual, Page: 20 / 116

Share
Download
Panasonic LUMIX DMC-FZ5GC Operating Instructions Manual Download Page 20

Preparation

20

VQT0Q30

∫

Temporarily storing the lens hood

1

1

Remove the lens hood, turn it 
around then align marker 

D

 on 

the lens hood to marker 

E

 on 

the adaptor.

2

Push the lens hood onto the 
adaptor until it clicks.

3

Rotate the lens hood 
counter-clockwise until it 
clicks.

2

Attach the lens cap.

• Do not take a picture while the lens 

hood is temporarily stored.

• Ensure that the lens cap is firmly 

attached.

• When the lens hood is attached, 

unstrap the lens cap and attach the lens 
cap only.

• Before taking pictures with flash, remove 

the lens hood first otherwise a shadow 
from the hood will be cast on the bottom 
part of the pictures (vignetting effect).

• When using the AF assist lamp in the 

dark, detach the lens hood.

• For details on how to attach the MC 

protector and the ND filter, refer to P102.

• Consult the dealer or your nearest service 

centre if you lose the supplied 
accessories. (You can purchase the 
accessories separately.)

,

VQT0Q30ENG.book  20 ページ  ２００５年２月１４日　月曜日　午後６時１３分

Summary of Contents for LUMIX DMC-FZ5GC





















































































































Reviews:

No comments