background image

Others

105

Card

While the card access indication 
appears (the card is accessed), do not 
open the Card/Battery Door to remove 
the card, do not turn the camera off or 
do not shake or cause impact to the 
camera.
Do not leave the card in places where 
there is high temperature or direct 
sunlight, or where electromagnetic 
waves or static electricity are easily 
generated.
Do not bend or drop the card. 

• The card may be damaged or the 

recorded content may be damaged or 
erased.

After use, be sure to remove the card 
from the camera and then store it.

• For storing or transporting the camera, 

place it in a bag.

• Do not allow dirt, dust or water to enter the 

terminals on the back of the card and do 
not touch it with your fingers.

Folder Composition

When a Memory Card with data recorded 
on it is inserted into a PC, the folders 
shown below will appear.

• In the [100_PANA] folder it is possible to 

record up to 999 pictures.

• In the [MISC] folder it is possible to record 

the files that have been set with DPOF 
settings.

• The files recorded in flip animation 

function are stored in [PRIVATE1] folder.

• The motion images created by flip 

animation function are stored in 
[100_PANA] or another folder.

Printing pictures recorded with HDTV 
mode

When you print pictures recorded after 
setting the picture size to [HDTV] 
(1920

k

1080 pixels), both ends of the 

pictures may be cut out.

To print pictures with ends:

When you order photo studios to print 
pictures:
• Ask the photo studio if the pictures can be 

printed with both ends.

When you print pictures with your printer:
• When using the printer with a trimming 

feature or a feature which cuts out both 
edges of the pictures, cancel the feature 
for printing.

• The feature depends on the printer used. 

Refer to the operating instructions of the 
printer for details.

100_PANA

MISC
PRIVATE1

EXPORT

DCIM

SD Memory  
Card

FZ3-GN.book  105 ページ  2004年7月27日 火曜日 午前9時25分

Summary of Contents for LUMIX DMC-FZ3GC

















































































































Reviews: