Panasonic LUMIX DMC-FZ20EB Operating Instructions Manual Download

Page: 50 / 120

Playback (basic)

Delete the pictures.

• It is possible to delete up to 50 pictures

all at once.

∫

To delete all pictures

Select [ALL DELETE].

Delete all of the pictures.

• Once deleted, pictures cannot be

recovered. Please double-check before
deleting pictures.

• Do not turn off the camera while deleting.
• Pictures that are protected (P87) or do not

conform to DCF standards (P46) will not
be deleted.

• When you delete pictures, use a battery

with sufficient battery power (P14) or use
the AC adaptor (DMW-CAC1; optional).

MULTI DELETE

DELETE THE PICTURES
YOU MARKED?

SELECT

SET

YES

MULTI/ALL DELETE

CANCEL

SELECT

MULTI DELETE
ALL DELETE

2 times

ALL DELETE

DELETE ALL PICTURES?

SELECT

SET

YES

FZ20-EB.book 50 ページ２００４年７月２９日　木曜日　午後９時５２分

Summary of Contents for LUMIX DMC-FZ20EB

























































































































Search results

Summary of Contents for LUMIX DMC-FZ20EB

Reviews:

Related manuals for LUMIX DMC-FZ20EB

Brands by name

Popular brands

Panasonic LUMIX DMC-FZ20EB, Operating Instructions Manual

Search results

Summary of Contents for LUMIX DMC-FZ20EB

Reviews:

Related manuals for LUMIX DMC-FZ20EB

Brands by name

Popular brands