- 205 -
Others
• The [CHARGE] indicator may blink under the influence of static electricity or electromagnetic wave.
This phenomenon have no effects on charging.
• If you use the battery charger near a radio, the radio reception may be disturbed.
• Keep the charger 1 m (3.3 feet) or more away from radios.
• The charger may generate whirring sounds when it is being used. This is not a malfunction.
• After use, be sure to disconnect the power supply device from the electrical outlet. (A very small
amount of current is consumed if it is left connected.)
• Keep the terminals of the charger and battery clean.
∫
About 3D viewing
Anyone who is hyper sensitive to light, suffers from heart disease or is otherwise unwell
should avoid viewing 3D contents.
• Viewing 3D contents may have an adverse effect to the individual.
If you feel tired, uncomfortable or otherwise strange when viewing 3D contents, stop
viewing at once.
• Continuing to view may cause illness.
• After stopping viewing, please rest appropriately.
When viewing 3D contents, we recommend taking a break every 30 to 60 minutes.
• Viewing for extended periods may cause eye-fatigue.
Short-sighted or long-sighted persons, those with differences in the sight of their right
and left eyes, and those with astigmatism are advised to correct their vision by wearing
glasses etc.
Stop viewing if you can clearly see a double image while viewing 3D contents.
• There are differences in the way that different people experience 3D contents. Please correct your
sight appropriately before viewing 3D contents.
• You can change the 3D setting of your television or 3D output setting of the unit to 2D.
Do not leave the card where the temperature is high, where electromagnetic waves or
static electricity are easily generated or exposed to direct sunlight.
Do not bend or drop the card.
• The card may be damaged or the recorded content may be damaged or deleted.
• Put the card in the card case or the storage bag after use and when storing or carrying the card.
• Do not allow dirt, dust or water to get into the terminals on the back of the card and do not touch the
terminals with your fingers.
Notice for when transferring to another party, or disposing of the memory card
• “Format” or “delete” using the camera or a PC will only modify the file management information, and
it will not erase the data in the memory card completely.
It is recommended to physically destroy the memory card or use the commercially available
computer data deletion software to completely erase the data in the memory card before transferring
to another party or disposing.
Management of data in the memory card is the responsibility of the user.
Charger
About 3D
Card
