267
12.
Using the Wi-Fi function
1
Select the menu.
2
Select [Via Network] or [Direct], and connect.
3
Select a device you want to connect.
• When the connection is complete, the screen is displayed. To change the send setting,
press [DISP.].
4
Select [Single Select] or [Multi Select].
• To change the setting or disconnect, press [Wi-Fi].
Sending selected images ([Send Images Stored in the Camera])
>
[New Connection]
>
[Send Images Stored in the Camera]
>
[Smartphone]
On your smartphone
When connecting with [Via Network]:
1
Turn on the Wi-Fi function.
2
Select the wireless access point you want to connect to, and set.
3
When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]:
1
When connecting with [Manual Connection] in [Direct]:
1
Turn on the Wi-Fi function.
2
Select the SSID that matches the one displayed on the screen of this unit, and
then enter the password.
3
[Single Select] setting
1
Select the picture.
2
Press [MENU/SET].
[Multi Select] setting
1
Select the picture. (repeat)
• The setting is canceled when the picture is selected
again.
2
Select [OK].
• The number of pictures that can be sent by [Multi
Select] is limited.
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Wi-Fi
2.