Technical use
83
Playing Back Images with a TV Monitor
By connecting the camera to a television via
the supplied A/V cable
1
, it is possible to
view and play back the recorded images.
[Preparation]
• Turn the camera and the television off.
1
Connect the A/V cable to the A/V OUT
socket of the camera.
2
Connect the A/V cable to the video in
and the audio in sockets of the TV.
• Yellow: to the video in socket
• White: to the audio in socket
3
Turn the television on and select
external input.
4
Turn the camera on and then set the
mode dial to playback [
].
• The image is displayed on the
television.
ª
Viewing images in other countries
When setting [VIDEO OUT] on the menu, you can view images on a TV in other
countries (regions) which use the NTSC or PAL system.
• Even if you set menu selection for [VIDEO OUT] to [PAL], the output signal is still
NTSC.
• When connecting to a TV, we recommend using the AC adaptor as the power
source. (P14)
• Do not use any other cables except the supplied one.
• The A/V cable cannot be connected to the “antenna” connection of your television.
Your TV must provide separate audio and video connections for this feature to
operate correctly.
• Read the TV operating instructions too.
USB
A/V
OUT
KC72‑PP.book 83 ページ 2002年12月12日 木曜日 午後7時38分
Summary of Contents for Lumix DMC-FZ1
Page 107: ...107 Memo KC72 PP book 107...