Panasonic Lumix DMC-FX90, Operating Instructions Manual, Page: 178 / 193

Others
- 178 -
• Use within the communication range of the wireless LAN network.
• Connection types and security setting methods are different depending on the wireless access
point (broadband router).
>
Refer to the operating instructions of the wireless access point (broadband router).
• When the radio waves are interrupted, the condition may improve by moving the location or
changing the angle of the wireless access point (broadband router).
• It may not automatically connect when the network SSID of the wireless access point
(broadband router) is set not to broadcast.
>
Set the network SSID of the wireless access point (broadband router) to broadcast.
• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency
operated nearby?
>
Radio waves may get interrupted when used simultaneously. Use them sufficiently away
from the device.
• Is the 5 GHz/2.4 GHz switchable wireless access point (broadband router) connected to other
equipment using the 5 GHz band?
>
The use of a wireless access point (broadband router) that can use 5 GHz/2.4 GHz
simultaneously is recommended. It cannot be used simultaneously with this camera if it is
not compatible.
• Perform [Add wireless AP] in the [Wireless settings] of the [Wi-Fi Setup] menu.
• Check if the wireless access point (broadband router) to connect is in operating state.
• The wireless access point (broadband router) may not display or may not connect when the
radio waves of the wireless access point (broadband router) are weak or depending on the
radio wave condition.
>
Perform the connection closer to the wireless access point (broadband router).
• It may not display even if the radio waves exist depending on the setting of the wireless access
point (wireless router).
>
Check the settings of the wireless access point (broadband router).
• The wireless access point (broadband router) may not be found depending on the radio wave
condition.
>
Perform the [Search Wireless AP]. (P130)
• Is the network SSID of the wireless access point (broadband router) set not to broadcast?
>
It may not be detected when it is set not to broadcast. Enter and set the network SSID.
(P130)
• Try the following:
>
Move this unit (especially the Wi-Fi transmitter) closer to the wireless access point
(broadband router)
>
Remove the obstacles between this unit and the wireless access point (broadband router)
>
Change the direction of this unit
About the Wi-Fi function
It cannot connect to the wireless LAN. Radio waves get disconnected.
Wireless access point (broadband router) is not displayed. Or it cannot be
connected.