- 47 -
Basic
• [Auto Power Off] is set to [5 minutes] in the Intelligent Auto Mode.
• [Auto Power Off] does not work in the following cases.
– When connecting to the AC adaptor (supplied)
– When connecting to a PC or a printer
– When recording or playing back motion pictures
– During a slide show
– [Auto Demo]
• The effect of the [LCD Power Save] is lower in the Digital Zoom range compared to the Optical
Zoom range.
• The effect of the [LCD Power Save] will not affect the image being recorded.
• Setting of [LCD Mode] has priority over the setting of [LCD Power Save] regarding the
brightness of the LCD monitor.
• [Auto Review] is activated regardless of its setting in the following cases.
– In [Handheld Night Shot] in Scene Mode
– When using Auto Bracket.
– When using [Burst].
• In Intelligent Auto Mode or [Panorama Shot] and [Photo Frame] in Scene Mode, the Auto
Review function is fixed to [2 sec.].
• [Auto Review] does not work when recording motion pictures.
[Economy]
You can conserve the battery life by setting these menus.
Also, the battery life is conserved by dimming the LCD monitor.
[Auto Power Off]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[2 minutes]
[5 minutes]
[10 minutes]
[Off]
[LCD Power Save]:
Brightness of the LCD monitor is lowered. The battery life will be
conserved by lowering the image quality of the LCD monitor
further during the recording
¢
.
¢
Excluding the Digital Zoom range.
[On]/[Off]
[Auto Review]
Set the length of time that the picture is displayed after taking the
still picture.
[1 sec.]
[2 sec.]
[Hold]:
The pictures are displayed until [Exit] is touched.
[Off]
