Panasonic Lumix DMC-FX80 Operating Instructions Manual Download

Page: 23 / 171

- 23 -

Basic

Basic

Selecting the Recording Mode

∫

List of Recording Modes

Note

• When the mode has been switched from Playback Mode to Recording Mode, the previously set

Recording Mode will be set.

Touch the Recording Mode icon in
Recording Mode.

On the Recording Mode list screen, touch
Recording Mode.

Normal Picture Mode

(P24)

The subjects are recorded using your own settings.

Intelligent Auto Mode

(P27)

The subjects are recorded using settings automatically selected by the camera.

Creative Control Mode

(P59)

Record while checking the image effect.

Scene Mode

(P62)

This allows you to take pictures that match the scene being recorded.

3D Photo Mode

(P68)

Takes a 3D picture.

Cosmetic Mode

(P69)

Takes a picture adjusting the skin texture.

Summary of Contents for Lumix DMC-FX80












































































































































































Search results

Summary of Contents for Lumix DMC-FX80

Reviews:

Related manuals for Lumix DMC-FX80

Brands by name

Popular brands

Panasonic Lumix DMC-FX80, Operating Instructions Manual

Search results

Summary of Contents for Lumix DMC-FX80

Reviews:

Related manuals for Lumix DMC-FX80

Brands by name

Popular brands